UNDERFLOOR HEATING UNDER PARQUET AND LAMINATE Even for renovations.

 

Main areas of application for underfloor heating under parquet and laminate

A laminate or parquet floor places particular requirements on heating systems. Laminotherm from ETHERMA allows pleasantly warm floors under almost any kind of parquet- or laminate flooring. Thanks to its low installation height (1.3 mm), Laminotherm from ETHERMA is ideal for renovations on top of existing screed and/or under a new floor covering. This heating system is installed in a floating way. The reinforced aluminium webbing guarantees an optimal distribution of heat and prevents the build-up of "hot spots".

UNDERFLOOR HEATING UNDER PARQUET AND LAMINATE FLOORS - ETHERMA laminotherm

  • Only 1.3 mm thin

  • Ideal heat distribution due to special foil

  • Very low magnetic field < 25 nT

  • Easy and quick mounting due to the floating installation and
    one connection line

Rated output: 230 V
Output: 120 W/m²
Temperature-resistant: up to 90 °C
Netted heating mat thickness: 1,3 mm
Insulation: Fluor Polymer PFA
Protection rating: IP X7
Protective measure: Earth-leakage circuit breaker, 30 mA
Connection line: 5 m; 2 x 1.0 mm² + protective braid
Test certification: SEMKO

For use in dry rooms.

LM-120 W/m²
As main heating in kitchens, bathrooms, foyers or winter gardens with standard insulation. Or for temperature control in the event of poor insulation and/or increased demand for heat.

LAMINOTHERM-SET ETHERMA eFLOOR LM PRO With intelligent built-in switch thermostat eTOUCH PRO

> 1 x Laminotherm 122-LM, 120 W/m²
> 1 x eTOUCH-eco switch-mounted thermostat
> 1 x FSH-12 sensor conduit
     incl. 2.5 m SS-12 installation hose

  • Only 1.3 mm thin

  • Ideal heat distribution due to special foil

  • Very low magnetic field < 25 nT

  • Easy and quick mounting due to the floating installation and
    one connection line

For use in dry rooms.

LM-120 W/m²
As main heating in kitchens, bathrooms, foyers or winter gardens with standard insulation. Or for temperature control in the event of poor insulation and/or increased demand for heat.

LAMINOTHERM SET eFLOOR LM BASIC - WITH eBASIC ELECTRONIC SWITCH-MOUNTED THERMOSTAT

> 1 x Laminotherm 122-LM, 120 W/m²
> 1 x eBASIC switch-mounted thermostat
> 1 x FSH-12 sensor conduit
     incl. 2.5 m SS-12 installation hose

  • Only 1.3 mm thin

  • Ideal heat distribution due to special foil

  • Very low magnetic field < 25 nT

  • Easy and quick mounting due to the floating installation and
    one connection line

For use in dry rooms.

LM-120 W/m²
As main heating in kitchens, bathrooms, foyers or winter gardens with standard insulation. Or for temperature control in the event of poor insulation and/or increased demand for heat.

Contact now

anfrage.at@etherma.com Daniel Munter
Technical support