AQUA WSP - Hot water storage, pressure resistant
The AQUA WSP pressure-resistant hot water storage is suitable for under-sink installation in a closed system. Thanks to the powerful 2000 W heating rod, the AQUA WSP is impressive with very short heating times of only 5.5 minutes for 5 L and 11 minutes for 10 L.
The stainless steel inner tank guarantees maximum safety and does not require regular replacement of an anode. The connection to the fitting is made via a safety group (not included in the scope of delivery). Due to the flameproof design, several tapping points can be connected. A pressureless connection is also possible.
Maximum safety and long service life thanks to stainless steel inner tank
Simple installation due to 230 V plug connection cable
Pressureless connection possible
No periodic replacement of the anode due to stainless steel tank
Frost protection setting on the temperature controller possible
One-step temperature adjustment from 23 °C to 70 °C
Safety temperature limiter with reset function
|Operating voltage:||230 V|
|Content:||5 or 10 L|
|Rated power:||2000 W|
|Installation:||Under table (UT)|
|Max. water pressure:||6,0 bar|
|Protection class:||IP 24|
|Water connection:||Gz 1/2"|
|Energy efficiency class:||A|
Decentralized hot water preparation from individual water tapping points.
5 L: sink
10 L: sink