DIRECT HEATING DEVICES For bathrooms and living rooms.


Electric direct heating for fast warming in living areas, cellars, toilets, bedrooms and even hobby rooms. This design is also ideal for bathrooms, as the units are all water spray-resistant.

The specially shaped air output grille distributes the warmed air uniformly and thus generates natural room convection. The electronic controller ensures that the temperature that you want is maintained precisely, to within 0.1ºC. An external time switch can reduce the room temperature by 4ºK.

  • Fast heating due to the Monobloc heating element

  • No wall discolouration as heat gets released to the front

  • Accurate electronic room temperature measurement

  • 4 modes: Comfort, reduction, frost protection, off through
    control line or programming on device

  • Suitable for bathrooms

  • Weekly program optimizes operating times

  • Child lock

  • Ecodesign guidelines compliant

Voltage: 230 V
Output: 500 - 2000 W
Temperature range: 7 - 27°C
Control: Electronic thermostate
Surface: Steel housing, powder coated
Colour: Traffic white RAL 9016
Device depth: 105 mm
Protection class: II
IP rating: IP 24
Connection cable: 2 pin + working lenght 90 cm
Certification:: EC compliant

The selection of the output depends on the heat demand of the room (height: 2.5 m) and the heating application.

The following is a guide:
30-55 W/m²    Low energy and passive house
60-80 W/m²    Well insulated housing
85-105 W/m²    Moderately insulated housing
110-130 W/m²    Poorly insulated housing

Contact now Daniel Munter
Technical support