LAVA® INFRARED HEATING WITH CUSTOMER MOTIF/PHOTO

LAVA® DYL 2.0 DESIGN YOUR LAVA® Design your individual infrared heating panel

LAVA® DYL 2.0 offers you the possibility to individually design your LAVA® GLAS 2.0 or LAVA® BATH 2.0 infrared heater. We print your desired theme - whether a holiday photo or company logo, so that the infrared heater fits perfectly into your environment. The LAVA® DYL is suitable for wall installation, and can be mounted vertically or horizontally. All LAVA® DYL are supplied as standard with a power cord and an ON/OFF switch and are Plug & Play ready.

LAVA® DYL 2.0 GLAS

  • Your LAVA® entirely the way you imagine it (e.g. logo, photo)

  • Optimised insulation reduces convection component

  • Large infrared radiation surface

  • Plug & Play connection system for easy individual control

  • Maintenance-free and magnetic field-free

 

ETHERMA HINT:
File should be at least 5 MB in size, with a 300 dpi resolution! Should you have any questions, please contact: marketing(kwfat)etherma(kwfdot)com.

Voltage: 230 V
Output: 180 - 700 W
Surface temperature: max. 70 °C at standard internal temp.
Surface: 6 mm ESG safety glass
Device/Installation depth: 30/61 mm
Protection rating: IP X4
Protection class: I
Connection: Patch cord 1 m
Wall mounting: horizontally or vertically
Warranty: 5 years
Certification: TÜV

Minimum requirements of the pictures:

Depending on the size of the LAVA, the image must also be of a certain size.
Here are the instructions for finding the image information and comparing with the table below:

PLEASE NOTE: We check the image quality and inform you if the image is printable.

FALSE RULES: Images should have at least 5 MB (at 300 dpi) or more, otherwise the quality of the print will be reduced too much.

If your image does not have the correct format for the shape of the LAVA®, send us your file with at least 5 MB at 300 dpi to marketing(kwfat)etherma(kwfdot)com and we will place your image on the infrared heater.

Note for customers:

Please remember that these are minimum requirements for a good-quality result.
The larger your image or photo, the more detailed the print will be

The image on the left has the correct size and resolution. Print result: Very good
The image on the right is too small, and its resolution is too low Print result: Cannot be used as the quality is too low

LAVA® DYL 2.0 BATH GLAS incl. towel holder

  • Your LAVA® entirely the way you imagine it (e.g. logo, photo)

  • Optimised insulation reduces convection component

  • Large infrared radiation surface

  • Plug & Play connection system for easy individual control

  • Maintenance-free and magnetic field-free

 

ETHERMA HINT:
File should be at least 5 MB in size, with a 300 dpi resolution! Should you have any questions, please contact: marketing(kwfat)etherma(kwfdot)com.

Voltage: 230 V
Output: 350, 500, 700 W
Surface temperature: max. 70 °C at standard internal temp.
Surface: 6 mm ESG safety glass
Device/Installation depth: 30/61 mm
IP rating: IP X4
Connection: Patch cord 1 m
Wall mounting: horizontally or vertically
Warranty: 5 years
Certification: TÜV

Minimum requirements of the pictures:

Depending on the size of the LAVA, the image must also be of a certain size.
Here are the instructions for finding the image information and comparing with the table below:

PLEASE NOTE: We check the image quality and inform you if the image is printable.

FALSE RULES: Images should have at least 5 MB (at 300 dpi) or more, otherwise the quality of the print will be reduced too much.

If your image does not have the correct format for the shape of the LAVA®, send us your file with at least 5 MB at 300 dpi to marketing(kwfat)etherma(kwfdot)com and we will place your image on the infrared heater.

Note for customers:

Please remember that these are minimum requirements for a good-quality result.
The larger your image or photo, the more detailed the print will be

The image on the left has the correct size and resolution. Print result: Very good
The image on the right is too small, and its resolution is too low Print result: Cannot be used as the quality is too low

Contact Now

Technical consulting
Datei hierhin ziehen, max. 10 MB
Datei hierhin ziehen, max. 10 MB
Datei hierhin ziehen, max. 10 MB
I hereby acknowledge and agree that all personal and non-personal data provided by me may be processed by automation in accordance with privacy policy by ETHERMA. The data is stored exclusively for answering the customer request.