DARK INFRARED HEATERS
For those who want no visible light, there is the possibility to work with dark
infrared heaters. These premium dark heaters are characterized by
uncompromising technology and exceptional design. The innovative heating element
converts the energy used into a maximum of heat, with minimal light emission.
Indoor use, e.g. in conservatories.
For optimum heat effect, the ambient temperature should be at least 15 ° C.
SOLAMAGIC® D3 2000 Dark infrared heater without control
The SOLAMAGIC® D3 is a powerful 2000 W premium dark emitter. The dark emitter is intended for indoor use such as conservatories, extensions of buildings and sheltered outdoor areas such as pavilions. The D3 can be easily controlled and dimmed in 3 steps (33 %/66 %/100 %) with the dimming module that can be purchased in addition.
Optional Bluetooth dimming module or radio dimming module available
Innovative heating element
No visible light
New quick mounting system
Quick clamping binder for fast alignment
FOR INTERIOR USE
Power: | 2000 W |
Voltage: | 230 V |
Heating element: | Solarstar-A technology (NoGlare) |
Residual light: | 1 lux/kW/m² |
Special colours: | Available for extra charge |
Connection: | Patchcord 50 cm |
IP rating: | IP 44 |
Approval mark: | TÜV |
Catering, garden, terrace, balcony
SOLAMAGIC® D3 2000 IN-CEILING MOUNTING Dark infrared heater with blind frame | 2000 W
The SOLAMAGIC® D3 ceiling recessed heater enables safe and discreet installation of the premium dark heater in a wide variety of ceiling constructions, but above all in protected outdoor and indoor areas. The housing and the blind frame are made of high quality aluminum. The device is equipped with a Solastar-AL heating tube, which offers high efficiency and a very long service life (about 5000 operating hours), especially due to the low residual light content. In protected outdoor and indoor areas, dark emitters allow a very flexible use and guarantee constant, pleasant heat zones.
Less residual light (<1 lux) due to the innovative "NO GLARE" heating tube
Can be integrated in the ceiling
Space-saving
Maximum heat radiation forward thanks to innovative reflector design
Fast heat at the push of a button
Easy installation
FOR INTERIOR USE
Power: | 2000 W |
Voltage: | 230 V |
Heating tube: | Solastar-AL "No glare" |
Colours: | White, titanium, nano-anthracite |
Connection: | 180 cm plug connector cable for installation connection |
Mounting: | Ceiling recessed |
Protection rating: | IP 44 |
Catering, garden, terrace, balcony
SOLAMAGIC® D2 2000 ARC Dark infrared heater with radio control
The SOLAMAGIC® D2 is a powerful 2000 W premium dark emitter. The dark emitter is intended for indoor use such as conservatories, extensions of buildings and sheltered outdoor areas such as pavilions. The D2 is available in two versions - as D2 BT with integrated Bluetooth control and as D2 ARC with integrated radio control. The D2 BT can be conveniently controlled and dimmed via Bluetooth 4.1 with an APP on your smartphone or tablet as well as with the hand-held BT transmitter, the D2 ARC with the hand-held radio transmitter (please order separately).
Innovative "NO GLARE" heating element
3-step dimmer (33% - 66% - 100%)
New quick mounting system
Adjustable with hand-held transmitter
Control via Solamagic 4 channel remote control
FOR INTERIOR USE
Power: | 2000 W |
Voltage: | 230 V |
Heating element: | Solarstar-AL (No Glare) |
Residual light: | 1 lux/kW/m² |
Colours: | White, Titanium, Nano-anthracite |
Special colours: | available for extra charge |
Connection: | 180 cm patch cord |
Hint: | for indoor use |
IP rating: | IP 65 |
Prüfzeichen: | TÜV |
Conservatories, extensions, interior
For optimum heat output, the ambient temperature should not be below 15 °C.
SOLAMAGIC® D2 2000 BT Dark infrared heater with Bluetooth control
The D2 is a high-performance dark emitter with 2000 W. It heats easily up to 16m² at 15 ° C ambient temperature. The D2 is used indoors such as conservatories, extensions, etc. and wherever you do not want to have light emission. Infrared heat has a dual effect - it does not heat the air, but people and objects that it encounters, which in turn heat. This guarantees pleasant warmth and a high operating cost savings compared to gas and quartz heaters. The D2 BT can be conveniently controlled and dimmed with Bluetooth 4.1 via an app and smartphone or tablet.
Innovative heating element
No visible light
Control via Smartphone or tablet with Bluetooth 4.1
3-stage dimmer (33% - 66% - 100%)
New quick mounting system
Quick clamping binder for fast alignment
FOR INTERIOR USE
Power: | 2000 W |
Voltage: | 230 V |
Heating element: | Solarstar-AL (No Glare) |
Residual light: | 1 lux/kW/m² |
Colours: | White, Titanium, Nano-anthracite |
Special colours: | available for extra charge |
Connection: | 180 cm |
Hint: | For indoor use |
IP rating: | IP 65 |
Approval mark: | TÜV |
Conservatories, extensions, interior
For optimum heat output, the ambient temperature should not be below 15 °C.