Price list All ETHERMA products at a glance
Hydraulic instantaneous water heater, 5.5kW, 230V
Ord. no. 41105
Type :ET-AQUA-WHM-5The hydraulically controlled AQUA WHM instantaneous water heater in a pressure-resistant design is suitable for rapid hot water preparation with a limited water volume in washbasins. Thanks to a built-in differential pressure switch, the appliance automatically switches to heating mode. Water pressure: 1.2 to 6.0 bar, for wall mounting, color: white, protection class: IP 24, water connection: Gz 3/8, 230 V.
Technical DataETIM-9.0
| Max. operating pressure | 6 bar |
| Material pressure tank | Plastic |
| Nominal content | 1.7 l |
| Nominal power | 5 kW |
| Nominal voltage 1 | 230 V |
| Nominal voltage 2 | 230 V |
| Operation | Manual |
| Temperature indication | None |
| Mounting method | Over sink/under sink |
| Power control | Electronic |
| Connected load | 5 kW |
| Heating system | Tube heating element |
| Safety breaker | Pressure switch-off |
| Degree of protection (IP) | IP24 |
| Cold tap water connection | External thread |
| Nominal diameter cold tap water | 3/8 inch (10) |
| Outer pipe diameter cold tap water | 12 mm |
| Hot tap water connection | External thread |
| Nominal diameter hot tap water | 3/8 inch (10) |
| Outer pipe diameter hot tap water | 12 mm |
| Suitable for plastic tube | Yes |
| Suitable for preheated water | Yes |
| Type of regulation | Hydraulic |
| Height | 225 mm |
| Width | 168 mm |
| Depth | 76 mm |
| Weight | 1.2 kg |