ETHERMA ICESTOP TRACE – PLUG & PLAY, SELF-REGULATING HEATING Trace WITH THERMOSTAT
ETHERMA ICESTOP TRACE protects pipes from ice and subsequent damage. It is a Plug & Play, self-regulating heating trace with a power output of 17 W/m at + 5°C. The thermostat is 100 % protected against humidity and switches frost protection on when at risk below + 3°C and off again above + 9°C. CAN BE LAID IN PLASTIC PIPES.
Finishing at plant simplifies installation
Self-regulating heating trace optimises heating performance
Usable on plastic pipes
Automatic activation below +3°C
Automatic switch-off above +9°C
|Power at 5°C:||17 W/m|
|Min. installation temperature:||- 45°C|
|On/off switching temp.:||+3°C, +9°C|
|Min. bending radius:||25 mm|
|Dimensions:||8,0 x 5,5 mm|
|IP rating:||IP X7|
|Connection cable:||Connector cable 2 m; 3 x 1.5 mm²|
Frost protection for pipes
Frost protection for troughs
Frost protection for plastic pipes
> Can be installed on plastic pipes.
> Crossing of the heating strips is allowed.
> Additional insulation of the pipe is crucial.
> We also manufacture intermediate ICESTOP TRACE lengths