why are ETHERMA infrared heaters so special?
Optimal radiation effect
The radiation efficiency indicates how much of the heat radiation generated in the
heating panel arrives in the room - in other words, it is the ratio of emitted
radiation power to the supplied electrical energy.
ETHERMA infrared heaters convince with a very high radiation efficiency! The heat radiation is MAXIMUM forward and has thanks to optimal insulation of the back hardly losses to the rear. Due to the large radiating surfaces and the homogeneous surface temperature of the infrared heaters, the room heats up
even and not only in zones (no radiation asymmetry).
Design HIGHLIGHT OR PURISTIC - YOUR SECISION!
Our infrared heater is stylish and noble at the same time and does not require a
disturbing frame. Due to the perfect processing of the edges and surfaces, the
infrared heaters stand for themselves.
The different surfaces and finishes of our LAVA® products are as diverse as your living spaces. In addition to our standard versions, you can design your own infrared heater - the most beautiful wedding moment, a snapshot of grandchildren on vacation or the company logo - ETHERMA LAVA® DYL 2.0 makes it possible.
Or do you prefer a real art print - with the series LAVAART we have turned our infrared heater into true works of art.
Ideal materials for more warmth.
Decisive for the quality is the surface finish of an infrared heater. Materials
such as glass, stainless steel or ceramics have a high radiation effect and are
therefore ideal for efficient radiation into the room.
In this case, surfaces are often referred to as ceramic, but in fact enamelled. The email is then applied again either on metal or glass.
Tested quality & safety
For ETHERMA, quality is not just a lip service. We voluntarily give our products
for external quality testing. The efficient and technically perfected LAVA®
infrared heaters have the CE and TÜV seal of approval, thus demonstrating
standardized processing and the necessary safety of the panels.
Despite the rapid warm-up phase, two temperature limiters prevent the overheating and also the danger of burning when touching the panel. The six millimeter thick tempered safety glass or the special ceramic plate and the Teflon-insulated, high-temperature-resistant dipole heating element guarantee maximum safety.
Made in Austria
Regional production for international standards.
In order to meet our and your requirements day by day, ETHERMA develops and produces the LAVA® infrared heaters with high-quality materials in our home country of Austria. In the two production sites near Salzburg, the infrared heaters are manufactured to the highest, international standards, subjected to a quality inspection by experts and carefully prepared for transport to your home.
Buying cheap means buying expensive.
You can see and feel the difference - make the comparison with other
Anyone who relies on a LAVA® infrared heater from ETHERMA not only receives a perfect quality product, but also benefits from the exceptional service provided by ETHERMA.
ETHERMA is committed to its roots and has therefore deliberately decided against production in low-wage countries. However, compared to other heating systems, the investment is still up to 70 percent lower.
LAVA® PRODUCT RANGE
LAVA® Plug & Play: Plug in and go
All LAVA® infrared heating units are delivered as standard without a control unit, with a plug-in connector cable and an ON/OFF switch. They are, therefore, ideal for new construction and anywhere where wired room thermostats are used. The Plug & Play connector system (IP65) allows either a direct connection to a wired room thermostat, the simple integration of a LAVA®-F wireless receiver or control directly on the unit with a LAVA®-R thermostat.
HOW CAN I USE LAVA®?
WHY RENOVATE USING INFRARED HEATING?
While modern gas heating or pump systems require the appropriate piping to transfer the hot water, infrared heaters only require access to a wall socket. Particularly in older buildings, which were heated without water-dependent heating systems, there are no heating pipes or heat circuit pumps, and these must be laid first. This construction expense is not needed for infrared heating, which allows fast, cost-effective and dust-free modernisation of the heating system.
Compared to infrared heating, the components of water-dependent heating systems respond slowly to changing temperatures, as the heating medium (water) must first be heated before it can distribute its pleasant warmth into the room. This process is not necessary with infrared heating.
INFRARED HEATING SYSTEMS IN YOUR SMART HOME.
Infrared heating systems can be controlled intelligently by means of an electronic thermostat. The owner can slide the latter into the heating panel using Plug and Play. When connected with a Smart Home system, your own infrared heating can communicate with other technical equipment in the house. Trouble-free remote access is thus also possible. Homeowners can easily adjust and control their infrared heating while on holiday, using their smartphone or tablet. This heating control, suited to your own heating needs, allows further heating cost savings. Further information on infrared heating can also be found here.
More economical heating with infrared
Modern heating distributes warmth, saves energy and is environmentally friendly. With LAVA® infrared heating, a design element is created which not only generates comfortable warmth, but also forms an essential component of your indoor lighting.
Thanks to the particularly snug feel created by infrared warmth, you will feel comfortable at lower room temperatures - thus saving on electricity and heating costs.
Ingenious warmth - because infrared radiant heat ensures a healthy room climate. Shapely and elegant, the LAVA® is a work of art which radiates warmth.
YOGA STUDIO, MELBOURNE, AUSTRALIA INGENIOUS WARMTH FOR YOGA
THE INITIAL SITUATION
In Melbourne, the plan was to create a modern yoga studio with an extraordinary atmosphere - while at the same time being environmentally friendly, and saving energy. The major challenge was to heat the high rooms to a constant 27°C - without generating drafts from the heating ventilation.
THE ETHERMA SOLUTION
LAVA®-GLAS-DM infrared heaters for ceiling installation provided the ideal heating solution. Radiated infrared warmth warms people, walls and objects directly - thus avoiding air circulation of the kind necessary for convection heating. Suspending the heaters from the ceiling provides loss-less warmth to the yoga students, and their elegant black design contributes to the studio's stylish ambience.