HEATING TRACE

Menu

HEATING TRACE For pipe trace heating.

ETHERMA eTRACE-10 – SELF-REGULATING HEATING TRACE

The eTRACE-10 heating trace offers you the smallest possible dimensions, is very flexible in use and is ideal for short heating circuits. The heating trace can be used for frost protection and temperature maintenance up to 65 °C. The eTRACE-10 is a lightweight self-regulating heating trace. Fields of application are industry and household appliances. Applications range from frost protection to temperature maintenance on pipes and vessels. The supply conductors are tin-plated copper, all heating traces are moisture-proof and UV-resistant. Self-regulating heating traces can be easily cut to the desired length and used immediately.

Self-regulating

Can be cut from the roll

Protected against moisture

UV, ozone and weather-resistant

Small dimensions

Output: 230 V
Outer insulation: TPE-O
Supply conductor: 0.56 mm² nickel-plated
Max. ambient temperature: switched off: 65 °C / switched on: 65 °C
Min. installation temperature: - 45°C
Min. bending radius: 25 mm
Certification: NEMKO

Pipeline trace heating, frost protection for industrial applications, temperature maintenance on pipes and vessels

For standard gutters, a 250 W/m² output is installed
  at heights up to 1000 m above sea level.


For different widths, output is calculated per metre as follows:
>    Roof gutter width (in m) x 250 Watts
>    So, for a gutter with a width of 10 cm: 0.10 m x 250 W = 25 Watt/m

Contact Now

Technical consulting
I hereby acknowledge and agree that all personal and non-personal data provided by me may be processed by automation in accordance with privacy policy by Etherma. The data is stored exclusively for answering the customer request.