HEATING TRACE For pipe trace heating.


The versatile, self-regulating heating trace eTRACE-15 is suitable for temperatures up to 80 °C. It is suitable for household appliances as well as industrial applications as frost protection or for maintaining a constant temperature in pipes and vessels. The supply conductors are nickel-plated copper. All heating traces are moisture- proof and UV-resistant. Self-regulating heating traces can be easily cut to the desired length and used immediately.


Can be cut from the roll

Protected against moisture

UV, ozone and weather-resistant

Voltage: 230 V
Outer insulation: TPE-O
Supply conductor: 1,23 mm² Cu vernickelt
Max. ambient temperature switched on: 80°C
Max. ambient temperature switched off: 65°C
Min. installation temperature: - 50°C
Min. bending radius: 25 mm
Certification: NEMKO

Pipeline trace heating, frost protection for industrial applications, temperature maintenance on pipes and vessels

For standard gutters, a 250 W/m² output is installed
  at heights up to 1000 m above sea level.

For different widths, output is calculated per metre as follows:
>    Roof gutter width (in m) x 250 Watts
>    So, for a gutter with a width of 10 cm: 0.10 m x 250 W = 25 Watt/m

Contact Now

Technical consulting
I hereby acknowledge and agree that all personal and non-personal data provided by me may be processed by automation in accordance with privacy policy by Etherma. The data is stored exclusively for answering the customer request.