ETHERMA eTRACE-10 – SELF-REGULATING HEATING TRACE
The eTRACE-10 heating trace offers you the smallest possible dimensions, is very flexible in use and is ideal for short heating circuits. The heating trace can be used for frost protection and temperature maintenance up to 65 °C. The eTRACE-10 is a lightweight self-regulating heating trace. Fields of application are industry and household appliances. Applications range from frost protection to temperature maintenance on pipes and vessels. The supply conductors are tin-plated copper, all heating traces are moisture-proof and UV-resistant. Self-regulating heating traces can be easily cut to the desired length and used immediately.
Benefits of this product
Self-regulating
Can be cut from the roll
Protected against moisture
UV, ozone and weather-resistant
Small dimensions
Technical data
| Output: | 230 V |
| Outer insulation: | TPE-O |
| Supply conductor: | 0.56 mm² nickel-plated |
| Max. ambient temperature: | switched off: 65 °C / switched on: 65 °C |
| Min. installation temperature: | - 45°C |
| Min. bending radius: | 25 mm |
| Certification: | NEMKO |
Selection Guide
Pipeline trace heating, frost protection for industrial applications, temperature maintenance on pipes and vessels
Planning assistance
For standard gutters, a 250 W/m² output is installed
at heights up to 1000 m above sea level.
For different widths, output is calculated per metre as follows:
> Roof gutter width (in m) x 250 Watts
> So, for a gutter with a width of 10 cm: 0.10 m x 250 W = 25
Watt/m
Download
